Nueve&Five Gooseneck Electric Kettle Review: a simple copper kettle for everyday coffee and tea

I’ve been using this Nueve&Five gooseneck electric kettle as my main hot water source for coffee and tea for a bit now. I swapped it in for a basic plastic electric kettle I had before, mostly because I wanted a gooseneck for pour-over and something made of stainless steel inside. No fancy app, no presets, just a simple on/off switch and a built-in thermometer on the lid. So if you’re expecting a high-tech barista tool, that’s not what this is.

In daily use, it’s pretty straightforward: you fill it, you flip the switch, it heats up in a few minutes, and it shuts off by itself. The brand advertises around five minutes to boil 1 liter, and that’s roughly what I saw, give or take 30–40 seconds depending on how full it is and how cold the water starts. For basic kitchen use (tea, instant noodles, pour-over, French press), the performance lines up with what they promise.

What pushed me to try this one instead of the dozens of similar kettles on Amazon was the mix of price, gooseneck spout, and the built-in thermometer. I don’t need a full temperature control base, but I do like knowing when the water is around 90–95°C for coffee instead of boiling it to death every time. The on-lid thermometer is simple but actually useful once you get used to it.

Overall, my first impression was: no nonsense, does what it says, but it’s not perfect. The copper finish looks nice from a distance but feels a bit more like painted metal than fancy copperware. There’s no beep, no temperature presets, and the base is as basic as it gets. If you just want hot water fast and a controlled pour for coffee, it gets the job done. If you’re picky about perfect temperatures and premium feel, you’ll probably notice its limits pretty quickly.

In terms of value, I’d put this kettle in the "good but not mind-blowing" category. You’re paying for a gooseneck design, stainless steel interior, auto shut-off, and a basic thermometer. You’re not paying for digital temperature presets, keep-warm functions, or a heavy premium build. Compared to a very cheap plastic kettle, you’re definitely getting an upgrade in materials and pour control. Compared to high-end pour-over kettles with variable temp control, you’re saving money but losing some convenience.

For the typical user who just wants to make better pour-over coffee or tea at home, this hits a sweet spot. You get:

• Stainless steel interior (no plastic water contact)
• Gooseneck spout for precise pouring
• Built-in thermometer so you’re not guessing
• Auto shut-off and boil-dry protection for safety

Where the value starts to feel a bit weaker is if you’re the kind of person who really cares about exact temperatures and long-term durability of the finish. For a bit more money, there are kettles with full temperature control bases, digital displays, and maybe sturdier-feeling metal. If you’re already deep into specialty coffee and you want precise 1-degree control, this will feel limited and you might outgrow it quickly.

For most everyday users though, I’d say the value is pretty solid. It heats fast enough, looks decent on the counter, and the pour is genuinely better than a normal kettle. It’s not perfect, and there are nicer options if you’re willing to pay more, but at its usual price, you get what you pay for and maybe a bit more. If you’re switching from a basic plastic kettle and just want something better without going overboard, it’s a sensible choice.

Visually, the copper color is what stands out first. On the counter, it looks pretty good and definitely better than my old plastic kettle. Just to be clear though: this isn’t a solid copper kettle, it’s a painted stainless steel finish. Up close, you can tell it’s painted, but from a normal distance it looks clean and modern. The shape is very classic gooseneck: narrow base, sloped body, and a thin curved spout. It doesn’t take up much space: roughly 11" long, 5.5" wide, 8.2" high. So if your counter is crowded, this is a plus.

The handle design is decent. It’s angled in a way that makes pouring pretty natural, especially for pour-over coffee. Even when the kettle is full, the handle doesn’t feel wobbly. I didn’t get any weird flex or creaks while pouring. The weight distribution is okay, though when it’s filled close to the max line, you do feel the weight in the wrist if you’re doing a slow pour-over. But that’s true for most metal kettles, not just this one.

The gooseneck spout is the main design feature that matters. In practice, it gives a controlled and steady flow. You can easily adjust from a thin stream for blooming coffee grounds to a slightly heavier flow for filling a mug. I didn’t get any random splashing or dribbling down the side, which happens with some cheaper gooseneck designs. For pour-over, this is honestly the part that works best on this kettle.

The built-in thermometer on the lid is a small round analog dial. It’s not hyper-precise like a lab tool, but as a rough guide (e.g., 80°C vs 95°C vs boiling), it’s good enough. The downside is that you need to be standing right there watching it if you care about a specific temperature. There’s no beep or anything to warn you. In short, the design is functional and fairly compact, looks nice enough on the counter, but you can tell it’s built to a budget and not meant as a luxury piece.

The kettle is made from 304 stainless steel inside, including the interior walls, lid, and spout. That’s the main reason I picked it over another plastic kettle. In use, I didn’t notice any plastic taste or weird smell in the water, even on the first few boils. That’s a big plus compared to cheaper plastic models that sometimes need several boils and rinses to get rid of the factory smell. The interior looks clean and is easy to wipe or descale.

The exterior copper color is a painted finish, not actual copper metal. It looks fine, but you can tell it’s not thick or ultra high-end. After some use, you’ll want to avoid metal scrubbers or harsh cleaners, or you’ll probably scratch it. A soft sponge and mild soap are enough. The brand calls the material feature "non-toxic," and from what I can see, all water-contact parts are stainless steel, not plastic, which is reassuring if you’re trying to avoid hot water touching plastic.

The base is pretty standard plastic with a metal heating plate. It doesn’t feel fragile, but it’s not heavy-duty either. The cord is average length; not super long, not super short. Depending on your kitchen layout, you may or may not wish it was longer. The removable lid is also stainless steel with the thermometer built in. The lid fits decently, though not vacuum-tight. As long as it’s on correctly, the auto shut-off works as expected.

In terms of build quality, I’d call it "pretty solid for the price" but not more than that. The welds on the spout look clean, and I didn’t notice any leaks or seepage at the joints. The handle is firmly attached, no wobble. But if you compare it side by side with higher-priced brands, you’ll feel the difference in thickness of the metal and the finish quality. So: good materials where it matters (inside), slightly budget feel on the outside, but nothing that screams cheap in daily use.

On durability, I obviously can’t simulate years of use in a short period, but I can talk about how it feels after regular daily use and what looks like it might age well or not. Using it several times a day for coffee, tea, and the odd instant soup, the kettle has held up fine so far. No leaks at the base or spout, no weird clicking sounds, and the auto shut-off still triggers properly. The stainless steel interior still looks clean. A quick descale with vinegar as they suggest (200 ml vinegar, let sit, boil, then rinse) works and doesn’t seem to harm anything.

The places where I’m a bit more cautious are the painted copper exterior and the handle joints. The finish looks nice at first, but I’d avoid banging it against other metal cookware or rubbing it with anything abrasive. I can easily see this kind of paint getting scratched over time if you’re rough with it. I haven’t seen any peeling or discoloration yet, but based on similar products I’ve owned, this is the part that usually shows age first.

The handle and spout connections look decently welded and screwed. No looseness so far, even when the kettle is full and I’m doing slow pours. The base is light plastic, so I wouldn’t call it heavy-duty, but if you’re not dropping it or yanking the cord, it should be okay. The cord strain relief is basic but not flimsy. One thing to keep in mind: this isn’t a kettle you want to slam down on the counter or toss into a cabinet full of heavy pans; treat it like a mid-range appliance and it should last a reasonable amount of time.

In short, durability seems decent but not bulletproof. The inside stainless steel should hold up well, and the heating performance hasn’t changed so far. The exterior finish is where I’d expect to see wear first. If you want something you can abuse for 10 years straight, I’d probably look at a more expensive brand. If you’re okay being a bit careful and just want a functional gooseneck for a few years of regular use, this one feels up to the job.

On performance, the kettle does what it claims. With its 1000W heating element, it takes around 4.5 to 5 minutes to bring a full 1L to a rolling boil in my kitchen, starting from room-temperature tap water. If I only fill it halfway for a single large mug or a pour-over session, it’s closer to 2.5–3 minutes. It’s not the fastest kettle I’ve used, but it’s not slow either. For a morning routine, it fits in fine: switch it on, grind coffee, set up the filter, and by the time you’re done, water’s basically ready.

Noise-wise, it’s fairly quiet. You still hear the usual boiling sound, but there’s no loud buzzing or annoying whine. I can use it early in the morning without waking people up in the next room, which wasn’t the case with one of my older kettles. The auto shut-off works reliably: once it hits a full boil, it clicks off by itself. I also tested boil-dry protection by putting in a very small amount of water (not totally empty, but close), and it shut off without going crazy or smelling burnt.

Where this kettle really earns its keep is the gooseneck pour. For pour-over coffee, the control is very good. You can get a slow, thin stream or a slightly stronger one just by tilting your wrist. The flow stays consistent without random spurts. I did several V60 and Chemex brews with it, and it genuinely makes the process easier than a normal wide-spout kettle. For tea, it’s less critical, but it’s still nice to be able to pour gently into small cups without splashing.

The built-in thermometer is practical if you actually look at it. For green tea or pour-over, I usually stop heating when it reaches around 90–95°C. You do have to manually flip the switch off, so it’s not as convenient as a digital temperature-control base where you just pick the exact temperature. But if you’re okay with watching the dial, it’s a decent compromise. Overall, performance is solid and predictable: heats reasonably fast, pours very well, and safety features work as advertised. It’s not high-end barista gear, but for everyday home use, it covers the basics very well.

When you unbox the Nueve&Five gooseneck kettle, there’s not much mystery. You get the kettle, the round base, and a short manual. That’s it. No extra filters, no cleaning brush, no fancy accessories. Personally, I’m fine with that, but if you like lots of extras, you won’t find them here. The kettle itself is pretty light at a bit over 2 pounds, and the base is also light, so the whole thing feels more compact than a lot of bulkier electric kettles I’ve used.

The kettle is rated at 1000W with a 1L capacity, and that combination makes sense in practice. It’s not the fastest thing I’ve ever used (some 1500W kettles boil water quicker), but 1 liter in about five minutes is decent. For one or two people making coffee or tea, the size is fine. If you regularly boil water for a family of four, you’ll probably have to refill it more often. The Amazon listing matches what you actually get: auto shut-off, boil-dry protection, gooseneck spout, and the thermometer on the lid.

One thing to note: there are no temperature presets, no keep-warm function, and no digital display. The only control is a simple rocker switch at the base of the kettle handle. You turn it on, it heats until boiling, then shuts off automatically. If you want to stop earlier (for example at 90°C for coffee), you just watch the analog thermometer and flip the switch yourself. So the thermometer is more of a guide than a real temperature control system.

In daily use, the product is basically a bridge between a cheap plastic kettle and a full-on barista temperature control kettle. It’s more precise than a standard spout kettle because of the gooseneck and the thermometer, but it doesn’t go as far as models with variable temperature bases. For the price bracket it sits in, the overall presentation is simple and practical, but it doesn’t give that high-end feeling that some more expensive brands do.