Vianté Electric Kettle With Infuser Review: a practical tea maker with a few quirks

I’ve been using this Vianté electric kettle with infuser for a few weeks, roughly 3–5 boils a day. I drink a lot of tea (loose leaf and bags), and my old basic kettle finally died, so I wanted something with temperature control and a built-in infuser instead of juggling a separate teapot. I’m not a collector or anything, I just want hot water at the right temp without babysitting the stove.

Right out of the box, this felt more like a small appliance than just a kettle. There are preset buttons for different teas, a keep-warm function, and the glass body lets you see exactly what’s going on. If you’re used to a $20 plastic kettle, this one looks and behaves more like the “fancy” option, but it’s still simple enough to use half-asleep in the morning.

Over these weeks, I’ve mainly used it for green tea at 175°F, black tea at full boil, and occasionally just heating water for a French press. I also tried a couple of cold brew / iced tea runs just to see if the infuser was practical for that. My main focus though is daily hot tea and how annoying (or not) it is to clean and live with.

To be clear: it’s not perfect. It heats fast, the controls are straightforward, and the tea tastes good, but there are a few long-term concerns and small design quirks that are worth knowing before you spend the money. If you want a very blunt take: it’s a pretty solid kettle for frequent tea drinkers, as long as you’re okay with some manual cleaning and you’re aware the warranty situation is a bit confusing.

In terms of price, this sits in the mid-range for electric kettles: more expensive than a basic plastic on/off model, cheaper than some premium brands with fancy design or smart features. For what you’re paying, you’re getting glass construction, stainless steel infuser, multiple temperature presets, and a keep-warm mode. If you actually use those features regularly, the price feels reasonable. If you don’t, you’re basically paying extra just for looks.

Compared to cheaper kettles I’ve owned, this one definitely feels nicer to use day to day. The pour is smoother, the water doesn’t touch much plastic, and I can make different teas properly without thinking too hard. For me, that has real value because I drink tea multiple times a day. When I compare it to higher-end kettles from brands like Breville, it’s less polished but also much cheaper, so it sits in that “good compromise” zone.

The main thing that hurts the value is the uncertain long-term durability and confusing warranty. If this was clearly backed by a solid 2-year warranty and people weren’t reporting that plastic/glue ring issue, I’d rate the value higher. As it stands, I feel like I’m getting a comfortable, feature-rich kettle that might not last forever, and I’m okay with that, but I’m also aware that I might have to replace it sooner than I’d like.

If you’re a heavy tea drinker who wants proper temperature control and a built-in infuser without paying top-tier prices, the value is pretty solid. If you just make the occasional cup of black tea or instant noodles, save your money and buy a basic stainless kettle. This one only makes sense if you’re going to lean on its features regularly.

Design-wise, it’s a mix of glass, stainless steel, and some plastic. On the counter, it looks pretty clean and modern. The glass body lets you see the water level and the color of your tea, which is actually useful, not just cosmetic. The stainless steel lid and base ring give it a more solid look than those cheap all-plastic kettles. If you care about how your appliances look on the counter, this one doesn’t scream “budget”.

The spout is wide and metal, which I really liked. My previous kettle had a narrow, partly plastic spout that dribbled and poured slowly. This one pours smoothly and fast, and there’s no plastic in the path of the water at the spout, which is reassuring. The handle is big enough to grab comfortably, even when the kettle is full, and it doesn’t get hot during use. The lid flips open enough to fill the kettle easily under a tap, and you can remove the infuser straight from the top without struggling.

On the downside, the base area where the glass meets the bottom has that plastic/glue ring people mention in reviews. After a few weeks, mine still looks fine, but I can see how, over months, that area could start to look worn or stained, especially if you’re not careful about drying it or if you have very hard water. It doesn’t feel fragile, but it also doesn’t feel bombproof. Also, the unit takes up a bit more counter depth than a very basic kettle because of the elongated base and handle position, so if your space is tight, measure first.

Buttons are on the base and are touch-style, not physical clicky ones. They respond well but don’t expect the same feedback as real buttons. If your counter is wet or greasy, you might have to wipe it down to get perfect responsiveness. Overall, the design is practical and pretty solid, but it’s not bulletproof. It looks good and works well day to day, but you’ll want to treat it a bit nicer than a $15 kettle you’d toss around.

The main materials are borosilicate glass, 304 stainless steel, and BPA-free plastic. That’s pretty standard for mid-range kettles that try to avoid having hot water sit directly on plastic. Inside, the boiling chamber is mostly glass and metal, which I prefer. The infuser basket is stainless steel, and it feels sturdy enough that it won’t bend from normal use or washing. No weird metallic taste from the infuser either, even on the first uses.

The base plate inside the kettle (the part that actually heats) is stainless steel. After a couple of weeks with moderately hard water, I started to see the usual limescale spots, but nothing out of the ordinary. A quick vinegar soak and rinse took care of it. This is just what happens with any metal-heating kettle, so I wouldn’t blame the product for that. As long as you descale once in a while, it’s fine.

The plastic parts are mainly the handle, the lid mechanism, the ring around where the glass meets the bottom, and of course the control base. They don’t feel cheap, but they also don’t feel like they’ll survive being dropped often. The big concern, as mentioned by other buyers, is that the plastic/glue ring at the bottom of the glass can start to visually deteriorate over time. I haven’t had it long enough to see real damage, but I can see a faint line where limescale and maybe heat stress could build up. It doesn’t affect function right away, but it’s not pretty and raises long-term questions.

Overall, the material choice is decent for the price: glass and stainless where it matters, plastic where it’s mainly structural or for handling. If you want a tank-like all-metal kettle that you can throw around, this isn’t it. But if you’re okay with something that looks nicer, needs a bit of care, and you’re willing to wash and dry it regularly, the build is good enough for everyday home use. Just be aware that this doesn’t feel like a 10-year heirloom piece; it feels like a mid-range appliance you’ll probably replace after a few years.

Short-term durability has been fine. I’ve been using it several times a day, moving it on and off the base, washing the infuser, and wiping down the glass. No cracks, no loose parts, no performance issues so far. The lid still opens and closes smoothly, and the buttons on the base haven’t shown any weird behavior. So for normal daily use over a few weeks, it feels stable and reliable.

The issue is more about what happens after 6–12 months. A lot of buyers mention that the area where the glass meets the bottom (with that plastic or glue ring) starts to look worn or deteriorated over time. One reviewer even had to contact customer service because it started to visibly break down around the 6-month mark. The company did replace it, but there was confusion about the warranty length: some info says 6 months, other info says 1 year with extension. That kind of mixed messaging doesn’t inspire a ton of confidence.

I can’t personally confirm long-term failure yet, but just looking at the construction, I’d say this is not the kind of kettle I’d expect to last 8–10 years. It feels more like a 2–3 year appliance if you treat it decently and keep it clean. The glass is thick enough that it doesn’t feel fragile in the hand, but if you bang it against a faucet or drop it, I doubt it will forgive you. Also, if you have hard water and don’t descale regularly, you’re going to see buildup and possibly staining around the bottom faster.

On the positive side, people mention that customer service is responsive when you push back a bit, and they did replace units that had issues. But you shouldn’t have to argue about what your warranty actually is. So in terms of durability, I’d call it: good for regular home use if you’re careful, but not something I’d buy expecting a decade of trouble-free service. If you’re okay with that and maybe a bit of hassle if something goes wrong, it’s acceptable. If you want a near-indestructible unit, you might want to look at simpler all-metal kettles instead.

In terms of performance, this kettle does the main job well: it heats water fast and hits the right temperatures. With about 1 liter of water, it reaches full boil in roughly 4–5 minutes in my kitchen. That’s comparable to or faster than the other electric kettles I’ve used. For lower temps like green tea, it obviously stops earlier, so it feels even quicker. The temperature presets (white, green, oolong, black) seem reasonably accurate based on how the tea tastes and how hot the mug feels.

The keep-warm function holds the temperature for about 30 minutes. In practice, that’s enough time for me to pour a couple of cups without having to re-boil. It doesn’t keep it scorching hot, but it keeps it in the right zone for drinking or quick reheating. If you’re the type who forgets their tea and comes back an hour later, you’ll probably still need to hit the button again, but for normal use, it does the job.

The infuser works well for loose leaf. You just load it up, clip it in, and start the program. The leaves have enough room to move around, and the resulting tea is consistent. I tried green, oolong, and black loose leaf, and the flavors came out fine. No strange plastic or metal taste from the kettle, which is important. For tea bags, you can either throw them in the infuser or straight in your mug and just use the kettle for hot water. Honestly, I mostly did the latter because it’s less cleaning.

Noise level is normal for an electric kettle: you hear the usual water heating sound, but it’s not obnoxiously loud. The automatic shut-off works reliably; once it hits the target temperature or boil, it cuts out and beeps. Overall, performance is solid and consistent. It’s not doing anything magical, but it does exactly what you want from a temperature-control tea kettle without drama.

In the box, you get the glass kettle itself, the stainless steel infuser basket with a handle, the heating base with the digital controls, and a basic instruction manual. No extra filters or fancy accessories, just the essentials. The capacity is 1.5 liters, which in real life means about 4–5 large mugs of tea per boil. For one or two people, that’s plenty. For a big family that all drinks tea at the same time, you might end up doing two rounds.

The controls are on the base, not on the handle, which I prefer. You’ve got preset buttons for different tea types (white, green, oolong, black) and a keep-warm button that holds the temperature for about 30 minutes. There’s also a simple “boil” function if you just want max temperature for noodles or French press. The display shows the temperature as it climbs, which is nice if you’re picky about not burning green tea.

The infuser basket is removable and sits in the center of the kettle. You can use it for loose leaf or tea bags. In practice, I used it more for loose leaf and just tossed bags straight into my mug. It’s decently sized, so you can brew a full pot without cramming the leaves. When you don’t need the infuser, you just pull it out and you’ve got a regular electric kettle for water.

Overall, in terms of what it offers, it’s pretty straightforward: a glass electric kettle with presets, a removable infuser, and a short keep-warm window. No Bluetooth, no app, nothing overcomplicated. It targets people who drink tea often and care about temperature, not people who want tech toys. That’s actually what I wanted, so on the “features vs headache” scale, it’s well-balanced.

From a straight “does this make my tea better than a basic kettle?” point of view, I’d say yes, but within reason. The temperature presets help a lot if you drink more than just black tea. My green teas stopped tasting burnt and bitter once I started using the 175°F setting instead of just boiling water and waiting. Same for oolong; it comes out smoother and more consistent when you don’t blast it with boiling water every time.

The infuser is handy if you like brewing a whole pot of loose leaf. You can dump in a generous amount of leaves, let the program run, and then just pour out multiple cups without fiddling with a separate teapot or strainer. I found it especially practical on weekends when I’m sitting at the table and refilling my mug a couple of times. The tea flavor is decent and consistent, no obvious off-tastes from the materials, and the glass body lets you quickly see how dark it’s getting.

However, if you’re only drinking tea bags and you don’t care about specific temperatures, this kettle is arguably overkill. A cheaper on/off electric kettle will get the job done just as well for basic black tea bags. Where this one earns its keep is if you drink different types of tea, or you share the kettle with someone who likes coffee or pour-overs and wants specific temps. It’s also nice for instant foods or French press coffee because you can hit a target temperature instead of guessing.

So effectiveness-wise: for a daily tea drinker who actually cares a bit about brewing properly, it does help. It doesn’t magically turn cheap tea into something special, but it makes it easier to avoid messing things up. If you’re more casual and just want “hot water fast”, you’re paying for features you might barely use.